|
This page is to help with measuring your area
Both for DIY (materials required)
or
Installation by us
The first thing to understand is that all Synthetic grass has a Nap (True direction of fibres). The grass must be laid with the Nap flowing in the same direction for optimum results.
Xtreme Turf rolls are predominantly all 2m wide for Landscaping - This reduces waste considerably and makes handling far easier.
When measuring your area it is best to draw a diagram (can be very rough).
Measure the length and the width - Multiply the Two figures and this will give you the area.
If you have curves or circles you must ' Box' up the area on your drawing - That is remembering the 2m wide rolls are of course rectangular when laid out.
Here is a few examples
A Simple rectangle is easiest this is Length x Width, in this case 8.75m x 1.5m = 12.75m2
This circle below has a diameter of 5.6m
So for this we "box" it into 3 sections
One panel in the middle - 2m x 5.62m and
Two panels - 2m x 5.1m Total required 32m2
This one is a curve,
 Curve is "boxed" up into a rectangle 4.1m x 2.1m = 8.6m2
|
